MAGAZINE ARTICLES by DREW FRITTS  

The following articles were originally written for, and published in Glass Line Magazine.

1.  "How to Make Cherry Wood Marble Molds"

• Figures 1 - 3
• Figure 4
• Figures 5 - 6
• Figure 7
• Figure 8
• Figure 9

2.  "Bullseye Marbles"

• Figure 1 - Steel Punty.
• Figure 2 - The Lollipop.
• Figure 3 - Adding Layers.
• Figure 4 - The Gather.
• Figure 5 - Fused Blanks.
• Figure 6 - Finished Marbles.
• Figure 7 - Twisting.
• Figure 8 - Final Punty.
• Figure 9 - Final Result.

3.  "Lampworked Marbles:  A Getting Started FAQ"

·
4.  "A Beginner's Guide to Glass Alchemy Colored Borosilicate"
This is a PDF document.  To view it you must have Adobe's Acrobat or Acrobat Viewer.

WEB ARTICLES by DREW FRITTS  

The following articles were originally written for, and published on the Internet by Drew Fritts.

1.  "My Home-Made Crucible Furnace!"  

• An article describing the crucible furnace that I built.

2.  "Pumping Glass"

• An article describing the use of a blood pressure bulb pump and valve to blow glass.

3.  "Marble Tweezers"

• An article extracted from my book Torchworked Marbles, Vol. 1, describing of how to make marble tweezers from coat hangers. 

4.  "Bit Bucket"

• An article extracted from my book Torchworked Marbles, Vol. 1, describing how to make a bit bucket for disposing of small pieces of hot glass.

5.  "Make Your Own Rod Rest"

• An article extracted from my book Torchworked Marbles, Vol. 1, describing how to make an inexpensive rod rest.